1000ML Essential Oil Distiller, Labware Set Extraction Distillation Apparatus Water Distiller Purifier Glassware Kits Hydrosol, Home Distillation Kit w/Separatory Funnel Condenser Pipe (1000 ml)

Essential Oil Refining1. Check if the funnel is leaking.2. Pour the mixed liquid into the funnel, place the funnel on the iron ring and let it stand.3. Open the piston of the separating funnel, then open the cork so that the lower liquid (water) is released from the lower end of the separating funnel, and close the cork when the oil-water interface is tangent to the top of the cork.4. Use the glass dropper to remove the essential oil.SpecificationMaterial: High Borosilicate Glass, Iron, Latex, Rubber, PlasticDistillation Flask Capacity: 1000ml/33.81OZBeaker Capacity:100ml/3.38OZ, 250ml/8.45OZPear-shaped Dispensing Funnel Capacity:100ml/3.38OZAlcohol Lamp Capacity:150ml/5.07OZConical Flask Capacity: 250ml8.45OZEssential Oil Bottle Capacity: 30ml/1.01OZSyringe Capacity: 10ml/0.33OZHeight of Iron Stand: 50cm/19.68inGlass Dropper Length: 15cm/5.9inAsbestos Net Diameter: 12.5cm/4.92inPlastic Funnel Diameter: 6cm/2.36inRubber Stopper Type: No. 5 Single HolePackage Included1*Alcohol Lamp1*Distillation Flask1*Serpentine Condenser2*Beakers1*Conical Flask1*Pear-shaped Funnel 2*Essential Oil Bottles1*Thermometer1*Glass Dropper1*Asbestos Mesh1*Plastic Funnel1*Tripod1 Pair*Gloves1*Syringe1*Flask Brush1*Latex Tube1*Rubber Stopper1*Water Stopper Clip1*BracketAll Accessories Needed for UseNotes1. Before using this product, please fix the iron frame base with nuts, then adjust the position of the iron frame and iron clamp, and connect the distillation flask and condenser tube.2. Position the sink higher than the plane of the condenser tube, then inject about 30 ml of water into the condenser tube from the inlet tube with a syringe.3. Connect the latex tube conduit and loosen the outlet latex tube stopper clip, water will flow out automatically (siphon phenomenon principle).4. Please note that the position of the mercury ball in the thermometer should be at the same level as the bottom of the nozzle and the liquid in the distillation flask should not exceed 2/3 volume or be less than 1/3 volume.5. The heating temperature should not exceed the boiling point of the highest substance in the mixture.6. Put a small number of broken porcelain tiles in the distillation flask to prevent the liquid from boiling.7. The position of the mercury ball of the thermometer should be located in the same horizontal line as the lower end of the branch pipe mouth.8. The cooling water in the condenser pipe enters from the lower port and exits from the upper port.

• [Quality Materials] - The glassware in this kit are made of high-quality high borosilicate glass, while the stand is made of high-quality iron. These high-temperature-resistant and high-hardness materials make this product strong, durable, and not easily damaged.
• [High Safety] - Low expansion rate, fire resistance, high-temperature resistance, and corrosion resistance of high borosilicate glassware is not easy to blow up in the temperature of sudden changes and can hold a variety of experimental materials. Uses knob adjusters to firmly fix the bracket, flask, and condenser, so as to prevent the joint from separating during the reaction process and keep it stable.
• [Large Capacity] - The Distillation Kit range includes flasks with a capacity of 1000 ml/33.81 oz, beakers (capacity 100 ml/3.38 oz and 250 ml/8.45 oz), separating funnels (capacity 100 ml/3.38 oz) and conical flasks (capacity 250 ml/8.45 oz). The large capacity and complete container can meet different experimental requirements.
• [Accurate Measurement] - Our distillation kit comes with a glass dropper, thermometer, and syringe, so you can precisely control doses, measure temperatures, and observe experimental changes for more optimal results.
• [Professional Equipment] - Includes a serpentine condenser for vertical continuous distillation or reflux and an easy-to-control pear-shaped dispensing funnel, allowing you to easily complete professional experiments. The distillation equipment with complete laboratory apparatus allows you to easily separate liquid mixtures, measure the boiling point of pure compounds, purification, and distillation, and many other experiments to meet the needs of laboratories, home DIY, etc.
• [Complete and Professional Kit] - A combination of 1.06qt 2-neck boiling flask and filling flasks, electronic heating furnaces, metal brackets, fixtures, and other accessories can meet your various professional needs at once, so you no longer need to purchase separately.